Casio Privia PX-5S User Manual page 13

Editable Parameters
• Shaded cells indicate a group made up of multiple setting items. Pressing the
setting items of that group.
■ Editable Melody Tone Parameters
Display Text
Pitch >Ent
Octave Shift
Initial Level
Attack Time
Release Time
Release Level
Stretch Tune
Filter >Ent
Cutoff
Pitch envelope. The editable parameters in this group affect the pitch of
notes.
• The figure below also applied to filter, amp, and other envelopes.
With the pitch envelope, the pitch of the sound corresponds to the
vertical (Level) axis.
• With a hex layer tone envelope, Decay Time can be divided into three
parts and Release Time can be divided into two parts and edited.
• When Decay Level 3 is reached during key release note on, an
immediate transition is made to Release Level 1 without sustain.
• The setting ranges of the parameters below are relative changes
(relative to the presets of the tone) in the case of melody tones and
drum tones. When editing a hex layer tone, they are absolute changes
that have no relation to the presets of the tone.
– Time and level of each envelope
– Rate, depth, delay, rise, modulation depth of LFO (page E-12)
Level
AL
DL1
IL
AT DT1
IL : Initial Level
AT : Attack Time
AL : Attack Level
DT
: Decay Time
(DT1: Decay Time 1)
(DT2: Decay Time 2)
(DT3: Decay Time 3)
DL : Decay Level
(DL1: Decay Level 1)
(DL2: Decay Level 2)
(DL3: Decay Level 3)
Octave shift. Changes the tone of notes in octave units.
Initial level. Pitch of the sound at initial note on.
Attack time. Time it takes until the attack level is reached from the
initial level.
Release time. Time it takes to reach Release Level after a key is
released.
Release level. Target level reached immediately after a key is released.
Stretch tuning. Sharpens high notes and flattens low notes to achieve
stretch tuning. Turn off this setting to play with normal (non-stretch)
tuning.
Filter. This is a group of editable parameters associated with filters
(tones).
• With this group, the vertical (Level) axis in the pitch envelope
diagram corresponds to how the filter is applied.
• For details about the setting items below, see "Pitch Envelope".
Initial Level, Attack Time, Release Time, Release Level
Cutoff frequency. Specifies the filter cutoff frequency.
Description
DL
RL
RL1
DL2 DL3
DT2 DT3 RT1 RT2
DT RT
RT : Release Time
(RT1: Release Time 1)
(RT2: Release Time 2)
RL : Release Level
(RL1: Release Level 1)
(RL2: Release Level 2)
Using Built-in Tones (Tutorial)
em (ENTER) button displays the
RL2
Time
–2 - 0 - +2
–64 - 0 - +63
–64 - 0 - +63
–64 - 0 - +63
–64 - 0 - +63
Off, Piano1, Piano2,
Piano3, Piano4, Piano5,
E.Piano1, E.Piano2
–64 - 0 - +63
Settings
E-11