Registration Memories - Kawai CS10 Owner's Manual

Registration Memories

The Registration function allows the current instrument setup (sound selections, split point, reverb and effect
settings, and various other panel options) to be stored to a memory and conveniently recalled at the touch of
a button. There are two banks ('A' and 'B') for each registration button, allowing up to 16 different registration
memories to be stored.
Registrations can also be loaded from/saved to a USB memory device. Please refer to pages 108/112 for more
information.
Settings stored in Registration memories
Functions
Selected sound
(including primary sound for each category)
Dual Mode / Split Mode / Four Hands Mode
Reverb, Effects
(Type, Settings)
Transpose
(Key Transpose, Song Transpose)
Metronome
(Beat, Tempo, Volume)
Entering Registration mode
Press the REGISTRATION button.
The LED indicator for the REGISTRATION button will turn on to
indicate that the registration function is in use.
Selecting a Registration memory
When the registration function is in use:
Press the or FUNCTION buttons to select the registration
memory bank 'A' or 'B'.
Press a SOUND button to select the desired registration memory.
The LED indicator for the pressed button will turn on to
indicate that the registration memory is selected.
Exiting Registration mode
Press the REGISTRATION button.
The LED indicator for the REGISTRATION button will turn off,
and the button panel will return to normal operation.
30
Settings
Basic Settings
Virtual Technician Settings
(including settings)
MIDI Settings
* Changes made to the Auto Power Off setting will be stored to User
Memory automatically.
Example: To select registration memory B-3, press the
FUNCTION button, then press the E.PIANO button.