Setting Up The Piano - Kawai CS10 Owner's Manual

Setting Up the Piano

1. Connecting the power cable to the instrument
Connect the included power cable to the 'AC IN' inlet located on
the back side of instrument in the bottom left corner.
3. Turning on the power
Press the POWER switch located on the right hand side of the front panel.
Adjusting the pedal support bolt
A pedal support bolt is attached at the base of the pedal board
to aid stability when the pedals are pushed.
Turn the bolt anti-clockwise until it makes contact with the floor
and supports the pedals firmly.
14
2. Connecting the power cable to an outlet
Connect the instrument's power cable to an AC outlet.
The instrument will turn on, and the words 'Concert Grand' will
be shown in the LCD display, indicating that the Concert Grand
sound is selected, and the instrument is ready to be played.
* The CS10 digital piano features a power saving mode that can turn
off the instrument automatically after a specified period of inactivity.
For more information, please refer to the 'Auto Power Off' setting on
page 117.
Pedal support bolt