Split Mode - Kawai CS10 Owner's Manual

Split Mode

The Split Mode function divides the keyboard into two sections, allowing each section to be played with a different
sound. For example, a bass sound in the lower section, and a piano sound in the upper section.
1. Entering Split mode
Press the FUNCTION button (SPLIT).
The LED indicator for the
the Split Mode screen will be shown in the LCD display.
* The default split point is set between keys B2 and C3.
The upper section and lower section sound names will be
shown in the LCD display. The LED indicator for the upper
section sound button will turn on, and the LED indicator for the
lower section sound button will start to flash.
Upper
section
sound
* By default, the lower section will be set to the 'Wood Bass' sound.
2a. Changing the upper/lower section sounds: Method 1
To select a different sound for the upper section:
Press the desired SOUND button.
Example: To select the 'Jazz Organ' sound for the
upper section, press the ORGAN button twice.
* Preferred Split Mode upper/lower section sound combinations can be
stored to a Registration memory for convenient recall. Please refer to
page 30 for more information.
2b. Changing the upper/lower section sounds: Method 2
It is also possible to change the upper/lower section sound without
pressing and holding buttons.
Press the or buttons to move the selection cursor over the
upper section or lower section sound.
Press the or buttons to cycle through the different sound
variations.
20
FUNCTION button will turn on, and
Lower
section
sound
LED indicator on:
Upper section sound.
LED indicator flashing:
Lower section sound.
To select a different sound for the lower section:
Press and hold the FUNCTION button, then press the desired
SOUND button.
Example: To select the 'W. Bass & Ride' sound for the
lower section, press and hold the 1 FUNCTION button,
then press the BASS & GUITAR button four times.
buttons:
Change sound variation.
buttons:
Move selection cursor.