Damper Noise - Kawai CS10 Owner's Manual

4

Damper Noise

When the damper pedal of an acoustic piano is pressed and released, it is often possible to hear the sound of the
damper head touching and releasing the strings.
The CS10 digital piano reproduces this sound, with the Damper Noise setting allowing the volume of this sound to
be adjusted.
* This Virtual Technician setting will affect acoustic piano sounds only.
1. Selecting the Damper Noise setting
After entering the Virtual Technician menu (page 76):
Press the or buttons to select the Damper Noise setting.
2. Adjusting the Damper Noise volume
Press the or buttons to increase or decrease the volume of
the Damper Noise setting.
* The Damper Noise volume be adjusted within the range of
Off, 1 - 10, with higher values resulting in a louder effect.
* To reset the Damper Noise setting to the default value, press the
FUNCTION button (RESET).
* Any changes made to the Damper Noise setting will remain until the
power is turned off.
* Preferred Damper Noise settings can be stored to a Registration
memory for convenient recall. Please refer to page 30 for more
information.
3. Exiting the Damper Noise setting
Press the FUNCTION button (BACK) to exit the Damper Noise
setting and return to the Function Menus screen.
81