Fall-Back Noise - Kawai CS10 Owner's Manual

Virtual Technician Settings
7

Fall-back Noise

When playing an acoustic piano, it is often possible to hear the faint sound of the keyboard action returning (i.e.
'falling back') to the neutral position after a key is released.
The CS10 digital piano reproduces this sound, with the Fall-back Noise setting allowing the volume of this sound
to be adjusted.
* This Virtual Technician setting will affect acoustic piano and harpsichord sounds.
1. Selecting the Fall-back Noise setting
After entering the Virtual Technician menu (page 76):
Press the or buttons to select the Fall-back Noise setting.
2. Adjusting the Fall-back Noise volume
Press the or buttons to increase or decrease the volume of
the Fall-back Noise setting.
* The Fall-back Noise volume be adjusted within the range of
Off, 1 - 10, with higher values resulting in a louder effect.
* To reset the Fall-back Noise setting to the default value, press the
FUNCTION button (RESET).
* Any changes made to the Fall-back Noise setting will remain until the
power is turned off.
* Preferred Fall-back Noise settings can be stored to a Registration
memory for convenient recall. Please refer to page 30 for more
information.
3. Exiting the Fall-back Noise setting
Press the FUNCTION button (BACK) to exit the Fall-back Noise
setting and return to the Function Menus screen.
84