GE Profile GXCF25FBS Owner's Manual page 6

Care and cleaning of the dispenser.
Draining the Dispenser
"ll/c dispens,.+r shouM bt+dr;6ued btdbr,.+*lem/iug the tanks and betbre lea i_:,gtbr long v;uations or abst'_:,* ,.'s.
(rear of dispenser)
Drain
outlet cap
1. Set both pox_er switches (on tile back of the dispenser)
in tilt: 0 (off)position and unplug tilt: dispenser.
2. Remoxe tile water bottle t>om the dispensel:
3. Ptlt a container that will withstand hot water under the hot
_ater rap. Press the hot disperser button mltil the water is
cool (about 1 quart). Add water to tile _old water reservoir
(on top Mlere tilt: bottle supplies _ater) as needed.
4. Dispense _ater ti'om both buttons into container(s) until
no more water (Tailbe disllensed (about I quart of _ttet"
still remains in the dispenser).
5. Place a large bucket b,.:rl,.:athtile drain outlet on the rear
of the dispenser.
6. Using a Phillips scre_driwr, loosen tile screws on tile bracket
covering tile drain outlet cap. Rotate tile bracket out of
tile _a) to allow access to tilt: cap.
7. Remo_e tilt: cap and silicon stopper f?rom tile drain outlet and
and allow _ater to drain. :\[_er draining, replacethestopper
andcap.
8. Rotate the lmu ket l/a_k into pla_e and tighwn s_re_s.
Make sure to install a tull bottle and dispense water Ji'om tile
hot _ater tap befbre plugging in and turning on tile dispenser
(see I_oading tho Disponsor).
6