Class 2 Command Set - ZyXEL Communications U-336E User Manual

Value Modulation Speed
48 V.27ter
72 V.29
73 V.17
74 V.17 w/st
96 V.29
97 V.17
98 V.17 w/st
121 V.17
122 V.17 w/st
145 V.17
146 V.17 w/st
* w/st means with V.17 short training

Class 2 Command Set

The following Class 2 commands are supported and implemented
per TIA PN2388 (8/20/90):
Command Syntax
+<command>=<value>
+<command>=?
+<command>?
Supported Commands (per TIA PN2388 8/20/90)
Command
+FAA=n
+FBADLIN=
<value>
Requirements
4800 required for FTM & FRM
7200 required for FTM & FRM
7200 required for FTM & FRM
7200 required for FTM & FRM
9600 required for FTM & FRM
9600 required for FTM & FRM
9600 required for FTM & FRM
12000 required for FTM & FRM
12000 required for FTM & FRM
14400 required for FTM & FRM
14400 required for FTM & FRM
Description
Execute a command or set a
parameter.
Read permissible settings.
Read current setting.
Value Description
Auto-answer mode parameter:
n=0 Answer as set by +FCLASS.
n=1 DCE answers and auto-determines
type.
0-255 Bad line threshold (number of
consecutive bad lines for a bad page
parameter):
Fax Operation 49