The Tr-064 Screen - ZyXEL Communications P-870H-53A v2 User Manual

Table 70 TR-069 (continued)
LABEL
Connection
Request
Password
Connection
Request URL
Apply/Save
Cancel

17.3 The TR-064 Screen

TR-064 is a LAN-Side DSL CPE Configuration protocol defined by the DSL Forum.
TR-064 is built on top of UPnP. It allows the users to use a TR-064 compliant CPE
management application on the their computers from the LAN to discover the CPE
and configure user-specific parameters, such as the username and password.
Click Advanced > Remote MGMT > TR064 to open the following screen.
Figure 100 TR-064
The following table describes the fields in this screen.
Table 71 TR-064
LABEL
Enanble TR064
Apply
P-870H/HW Series User's Guide
DESCRIPTION
Enter the connection request password.
When the ACS makes a connection request to the ZyXEL Device, this
password is used to authenticate the ACS.
This shows the connection request URL.
The ACS can use this URL to make a connection request to the ZyXEL
Device.
Click this button to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Select the check box to activate management via TR-064 on the LAN.
Click this button to save your changes back to the ZyXEL Device.
Chapter 17 Remote Management
181