System (1/2) - Panasonic AK-HRP200G Operating Instructions Manual

ROP.menu.setting.
(continued)
Item Display
LEVEL.
DEPENDENT
DARK.DETAIL
SYSTEM.(1/2)
→＊＊ ＳＹＳＴＥＭ （ １／２ ） ＊＊
ＲＥＴＵＲＮ１
ＲＥＴＵＲＮ２
ＲＥＴＵＲＮ３
ＲＥＴＵＲＮ４
ＲＥＴＵＲＮ・ＤＥＬＡＹ
ＤＯＷＮ ＣＯＮＶＥＲＴ ＭＯＤＥ
ＵＰ ＣＯＮＶＥＲＴ ＭＯＤＥ
ＨＤ ＣＯＬＯＲ ＢＡＲ
ＰＡＴＨＯ
ＳＤＩ３－４ ＯＵＴ
Item Display
RETURN1 HD.SDI1
HD.SDI2
RETURN2 HD.SDI1
HD.SDI2
RETURN3 HD.SDI1
HD.SDI2
RETURN4 HD.SDI1
HD.SDI2
RETURN.·. NORMAL
DELAY SHORT
DOWN.
CONVERT.
MODE
UP.CONVERT.
MODE
Function
0 Lowers the detail in dark areas.
‫׀‬
It adjusts the level.
5.%
‫׀‬
30.%
0
‫׀‬
1
‫׀‬
5
ＨＤ ＳＤＩ１
ＨＤ ＳＤＩ１
ＨＤ ＳＤＩ１
ＨＤ ＳＤＩ１
ＮＯＲＭＡＬ
ＳＣ
ＳＣ
ＡＲＩＢ
ＯＦＦ
ＰＭ
( indicates factory default settings.)
Function
Sets the input allocations of
return signal 1.
VBS
Sets the input allocations of
return signal 2.
VBS
Sets the input allocations of
return signal 3.
VBS
Sets the input allocations of
return signal 4.
VBS
Selects whether a RET display
video will be delayed by 1 F
(NORMAL) or by the shortest
possible period (SHORT).
SC Selects the down-conversion
SQ system for video output from SD
LB SDI and VBS.
SC Selects the up-conversion
SQ system for videos used as SD
LB SDI and VBS return videos.
Item Display
HD.COLOR.BAR FULL
BARS-1
ARIB
BARS-2
BARS-3
BARS-4
BARS-5
BARS-6
PATHO
SDI3-4.OUT NORMAL
Function
Select the color bar signals to be
output from the HD/SD SDI OUT
connectors and VBS connector
when "BAR" has been selected
on the operation panel of the
ROP.
When they are output in VBS
or SD format, color bars in HD
format are output in the mode
specified with
DOWNCONVERT MODE.
FULL:
75 % full field color bar
BARS-1:
Color bar based on the
SMPTE standard
ARIB:
ARIB multi-format color bar
BARS-2:
Color bar based on the EIAJ
standard
BARS-3:
Split field color bar
BARS-4:
75 % full field color bar placed
in an area with a 4:3 aspect
ratio.
(Displayed 40 % gray outside
the area.)
BARS-5:
Color bar based on the
SMPTE standard that is
placed in an area with a 4:3
aspect ratio.
(Displayed 40 % gray outside
the area.)
BARS-6:
Color bar based on the EIAJ
standard that is placed in an
area with a 4:3 aspect ratio.
(Displayed 40 % gray outside
the area.)
OFF
Select ON/OFF for the
ON pathological signals.
Selects the signals output from
PM the 3rd and 4th HD/SD SDI
signal output connectors on a
CCU.
21