Apm - Asus F2A85-M2 User Manual

Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).
Configuration options: [Enabled] [Disabled]
Change Settings Auto]
This item appears only when you set the previous item to [Enabled] and allows you to
select the Serial Port base address.
Configuration options: [Auto] [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4]
[IO=2E8h; IRQ=3]
2.5.9

APM

Deep S4 [Disabled]
[Disabled] Prevents Deep S4 state from switching off all power.
[Enabled] Allows the BIOS to switch off all power at Deep S4 state to conserve
power. When Enabled, waking up the system via peripheral devices are not
available. System will only wake up by pushing the power button.
WOL (include AC Power Loss) [Disabled]
[Disabled] Disables Wake On LAN after a power failure.
[Enabled] Wake On LAN after a power failure (G3 state).
Restore AC Power Loss [Power Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By PS/2 Keyboard [Disabled]
[Disabled] Disables the Power On by a PS/2 keyboard.
[Space Bar] Sets the Space Bar on the PS/2 keyboard to turn on the system.
[Ctrl-Esc] Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.
[Power Key] Sets Power key on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
ASUS F2A85-M2
2-15