Audio Adjust - Integra DTR-50.1 Instruction Manual

Advanced Setup—Continued

Audio Adjust

With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like.
1 Press the [Receiver] button followed by
the [Setup] button.
The main menu appears onscreen.
If the main menu doesn't appear, make sure the
appropriate external input is selected on your TV.
2
Use the Up and Down [ ]/[ ] buttons to
select "3. Audio Adjust", and then press
[Enter].
3 Use the Up and Down [ ]/[ ] buttons to
select the submenu, and then press
[Enter].
Multiplex/Mono
Multiplex
Input Channel
This setting determines which channel of a stereo multiplex source is output. Use it to select audio channels or
languages with multiplex sources, multilingual TV broadcasts, and so on.
Mono
Input Channel
This setting specifies the channel to be used for playing any 2-channel digital source such as Dolby Digital, or
2-channel analog/PCM source in the Mono listening mode.
Output Speaker
This setting determines which speakers output mono audio when the Mono listening mode is selected.
Note:
If the "Center" setting is set to "None" (page 96), this setting is fixed at "Left/Right".
Main: The main channel is output (default).
Sub: The sub channel is output.
Main/Sub: Both the main and sub channels are output.
Left/Right: Both the left and right channels are output (default).
Left: Only the left channel is output.
Right: Only the right channel is output.
Center: Mono audio is output by the center speaker (default).
Left/Right: Mono audio is output by the front left and right speakers.
4 Use the Up and Down [ ]/[ ] buttons to
select setting, and then use the Left and
Right [ ]/[ ] buttons to set them.
5 When you've finished, press the [Setup]
button.
The setup menu closes.
Note:
This procedure can also be performed on the AV receiver
by using its [Setup] button, arrow buttons, and [Enter]
button.
99