Basic Operations; Selecting The Input Source - Integra DTR-50.1 Instruction Manual

Basic Operations

Selecting the Input Source

This section explains how to select the input source (i.e., the AV component that you want to listen to or watch).
Input selector buttons
1
AV receiver Remote
controller
or
2
3
AV receiver Remote
controller
or
4
Master Volume
Use the AV receiver's input selector buttons to select the input
source.
To select the input source with the remote controller, press the
[Receiver] button, and then press the Input Selector buttons.
Start playback on the source component.
When you select DVD or another video component, on your TV, you'll need
to select the video input that's connected to the AV receiver's HDMI outputs,
COMPONENT VIDEO MONITOR OUT or MONITOR OUT.
On some DVD players, you may need to turn on the digital audio output.
To adjust the volume, use the Master Volume control, or the remote
controller's VOL [ ]/[ ] button.
The volume can be set to –
play).
The AV receiver is designed for home theater enjoyment. It has a wide volume
range, allowing precise adjustment.
The volume level can also be displayed as an absolute value. See "Volume
Setup" on page 109.
Select a listening mode and enjoy!
See "Using the Listening Modes" on page 83.
dB, –81.5 dB through +18.0 dB (relative dis-
Input
Selector
Receiver
VOL /
59