Using The Onscreen Setup Menus; Using The Display To Change The Settings - Integra DTR-50.1 Instruction Manual

First Time Setup—Continued
Enter
Setup

Using the Onscreen Setup Menus

Carry out the settings for the AV receiver by using the
Onscreen Setup Menu.
1
Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
Tip:
On several functions, the explanation
will be displayed under the screen.
2
Use the Up and Down [ ]/[ ] but-
tons to select item and then
press [Enter].
The submenu appears.
Press the [Setup] button to close the
menu.
Press the [Return] button to return to
the previous menu.
44
Receiver
Menu
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
Using the Display to change the
settings
The settings of the AV receiver can be changed using the
Display.
1 Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu item appears on the
display.
2 Use the Up and Down [ ]/[ ] but-
tons to select item and then
press [Enter].
The submenu item appears on the
display.
Press the [Setup] button to close the
menu.
Press the [Return] button to return to
the previous menu.
Onscreen Setup Menus and Display
As each item in the Onscreen Setup Menus is selected,
the selected items will be displayed one by one.
Onscreen Setup Menus
Menu
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
Display
Note:
During Audyssey MultEQ
Speaker Setup, messages, etc., that are displayed on the
TV screen will appear in the Display.
®
Room Correction and