Basic Operations
Selecting the Input Source
This section explains how to select the input source (i.e., the AV component that you want to listen to or watch).
Multi CH
1
AV receiver
2
3
AV receiver
54
1
Use the AV receiver's input selector buttons to select the input
Remote
controller
source.
To select the input source with the remote controller, press the
or
[Receiver] button, and then use the Input Selector buttons.
Start playback on the source component.
When you select DVD or another video component, on your TV, you'll need
to select the video input that's connected to the AV receiver's COMPONENT
VIDEO OUT, HDMI OUT or MONITOR OUT.
On some DVD players, you may need to turn on the digital audio output.
To adjust the volume, use the Master Volume control, or the remote
Remote
controller
controller's [VOL] button.
The volume can be set to MIN, 1 through 99, or MAX.
or
The AV receiver is designed for home theater enjoyment. It has a wide volume
range, allowing precise adjustment.
Multi CH
3
1
1
3