Integra DTR-5.8 Instruction Manual page 49

First Time Setup—Continued
Component Video Setup
If you connect to a COMPONENT VIDEO IN, you must
assign it to an input selector. For example, if you connect
your DVD player to COMPONENT IN 3, you should
assign it to the DVD input selector.
If you want to output composite and S-Video sources
from the COMPONENT VIDEO OUT, select "---," as
explained below.
Input selector
DVD
VCR/DVR
CBL/SAT
GAME/TV
AUX
TAPE
CD
If you've connected your TV to the AV receiver with a
component video cable, you can set the AV receiver so
that composite video and S-Video sources are upcon-
verted* and output by the COMPONENT VIDEO OUT.
You can set this for each input selector by selecting the
"- - -" option.
Composite video, S-Video
IN
OUT
Composite video, S-Video
1
Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "1. Input/Out-
put Assign," and then press
[Enter].
The Input/Output Assign menu
appears.
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Input
VIDEO IN jack
IN 1
- - -
- - -
- - -
- - -
- - -
- - -
Component video
Component video
]/[ ]
3
Use the Up and Down [
buttons to select "3. Component
Video Input," and then press
[Enter].
The Component Video Input menu
appears.
1–3. Component Video Input
DVD
VCR/DVR
CBL/SAT
GAME/TV
AUX
TAPE
TUNER
CD
4
Use the Up and Down [
buttons to select an input selec-
tor, and then use the Left and
Right [
IN 1: Use the video component
IN 2: Use the video component
IN 3: Use the video component
- - -: Output composite video
There are no assignments for TUNER.
5
Press the [Setup] button.
The setup menu closes.
Notes:
• For composite video and S-Video upconversion for
the COMPONENT VIDEO OUT, the HDMI Monitor
setting must be set to No (see page 47), and the Com-
ponent Video Input setting must be set to "- - -." See
page 24 for more information on video signal flow and
upconversion.
• This procedure can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
]/[ ]
IN 1
- - -
- - -
- - -
- - -
- - -
- - -
- - -
]/[ ]
]/[ ] buttons to select:
connected to COMPO-
NENT VIDEO IN 1.
connected to COMPO-
NENT VIDEO IN 2.
connected to COMPO-
NENT VIDEO IN 3.
and S-Video sources from
the COMPONENT
VIDEO OUT.
49