Integra DTR-40.3 Instruction Manual page 59

■
HDMI Through
Off
Auto:
Detects the signal and automatically selects the input
source.
BD/DVD, VCR/DVR, CBL/SAT, GAME, PC,
AUX, TV/CD, PHONO, PORT:
Selects the input source for which the HDMI
Through function is enabled.
Last:
The HDMI Through function is activated on the
input source selected at the time of setting the AV
receiver to standby mode.
When enabling the HDMI Through function, regardless of
whether the AV receiver is on or in standby, both audio
and video streams from an HDMI input will be output to
the TV or other components via HDMI connection. The
HDMI indicator lights when enabled (HDMI is dimly lit).
This setting is set to "Auto" automatically when the above
"HDMI Control(RIHD)" is set to "On".
Note
• Only the input source assigned to the HDMI IN via
"HDMI Input" is enabled (➔
• The power consumption during standby mode will increase
during the HDMI Through function: however in the following
cases, the power consumption can be saved:
– The TV is in standby mode.
– You are watching a TV program.
• Refer to the connected component's instruction manual for
details.
• Depending on the connected component, the correct input source
may not be selected with the setting set to "Auto".
• This setting is set to "Off" automatically when the "HDMI
Control(RIHD)" setting is set to "Off".
page 44).
■
Audio TV Out
Off
On
This preference determines whether the incoming audio
signal is output from the HDMI output. You may want to
turn this preference on if your TV is connected to the
HDMI output and you want to listen to the audio from a
connected component through your TV's speakers.
Normally, this should be set to "Off".
Note
• If "On" is selected and the audio can be output from the TV, the
AV receiver will output no sound through its speakers. In this
case, "TV Speaker" appears on the display by pressing
Display.
• When " HDMI Control(RIHD)
" "
fixed to Auto .
• With some TVs and input signals, no sound may be output even
when this setting is set to " On
"
• When "Audio TV Out" or HDMI Control(RIHD)" is set to
" "
On and you're listening through your TV's speakers
page 17), turning up the AV receiver's volume control will
(➔
make the sound be output from the AV receiver's front left and
right speakers. To stop the AV receiver's speakers producing
sound, change the settings, change your TV's settings, or turn
down the AV receiver's volume.
• Listening mode cannot be changed when this setting is set to
"On" and the input source is not HDMI.
• If the "Monitor Out" setting is set to "Both(Main)" or
"Both(Sub)" (➔ page 44) and if your TV connected to a
priority output cannot output the audio, the sound will be heard
from AV receiver's speakers.
■
Audio Return Channel
Off
Auto:
The audio signal from your TV tuner can be sent to
the HDMI OUT MAIN of the AV receiver.
The audio return channel (ARC) function allows an ARC
capable TV to send the audio stream to the HDMI OUT
MAIN of the AV receiver. To use this function, you must
select the TV/CD input selector and your TV must be
ARC capable.
Note
• If you set "Audio Return Channel" to "Auto", the "Audio
Selector" settings of the TV/CD input selector will be
automatically switched to "ARC"
• The "Audio Return Channel" setting can be set only when the
"HDMI Control(RIHD)" setting is set to "On".
• This setting is set to "Auto" automatically when the "HDMI
Control(RIHD)" is set to "On" for the first time.
" is set to " On " , this setting is
" .
page 55).
(➔
En
59