Integra DTR-40.3 Instruction Manual page 19

Connect your components to the appropriate jacks. The default input assignments are shown below. See "Connection
Tips and Video Signal Path" for more information
No. Jack/Port
USB *1
USB, AUX Input Video
AUX Input Video
Audio L/R
DIGITAL IN COAXIAL
OPTICAL
UNIVERSAL PORT
ETHERNET
MONITOR OUT
BD/DVD IN
VCR/DVR IN
CBL/SAT IN
GAME IN
PC IN
TV/CD IN
PHONO IN
COMPONENT IN 1 (BD/DVD)
VIDEO
IN 2 (CBL/SAT)
IN 3 (GAME)
MONITOR OUT
PC IN *4
*5
Multichannel input
Note
*1 Do not connect the AV receiver's USB port to a USB port on your computer. Music on your computer cannot be played through the
AV receiver in this way.
*2 When USB input is selected, you can input video signals from the AUX Input Video jack.
*3 Connect a turntable (MM) that has a built-in phono preamp to TV/CD IN, or connect it to PHONO IN with the phono preamp turned
off. If your turntable (MM) doesn't have a phono preamp, connect it to PHONO IN. If your turntable has a moving coil (MC) type
cartridge, you'll need a commercially available MC head amp or MC transformer to connect to PHONO IN. See your turntable's
manual for details.
If your turntable has a ground wire, connect it to the AV receiver's GND screw. With some turntables, connecting the ground wire
may produce an audible hum. If this happens, disconnect it.
*4 When you connect your personal computer to PC IN and select the PC input selector, the video of the personal computer is output
from the HDMI outputs. However, if you have assigned the HDMI inputs to the PC input selector, the AV receiver will output
signals received from the HDMI inputs instead of signals from PC IN. To have the signals output from PC IN, select "- - - - -" for
"PC" in the "HDMI Input" setting
*5 To select the multichannel input, select the BD/DVD input selector and see "Audio Selector"
subwoofer sensitivity for the multichannel input, see "Subwoofer Input Sensitivity"
• With connection , you can enjoy Dolby Digital and DTS. (To record or listen the audio in Zone 2 as well, use
.)
• With connection , you can listen to and record audio from external components while you are in Zone 2.
• With connection , if your Blu-ray Disc/DVD player has both the main stereo and multichannel outputs, be sure to
connect to the main stereo.
■
How to record a video source
With the connections described above, you cannot record the videos through the AV receiver. See "Recording" about
connections for video recording
(➔ page 85).
*2
1 (BD/DVD)
2 (VCR/DVR)
3 (CBL/SAT)
1 (GAME)
2 (TV/CD)
page 45).
(➔
(➔ page 42).
✔: Assignment can be changed
Components
iPod/iPhone, MP3 player, USB flash drive
iPod/iPhone (video playback)
Camcorder, etc.
Blu-ray Disc/DVD player
VCR or DVD recorder/digital video recorder, RI
dock
Satellite/cable set-top box, RI dock, etc.
Game console
TV, CD player
Universal port option dock (UP-A1 etc.)
Router
TV, projector, etc.
Blu-ray Disc/DVD player
VCR or DVD recorder/digital video recorder, RI
dock
Satellite/cable set-top box, etc.
Game console, RI dock
Personal computer
TV, CD player, cassette tape deck, MD, CD-R,
Turntable *3 , RI dock
*3
Turntable
Blu-ray Disc/DVD player, RI dock
Satellite/cable set-top box, RI dock, etc.
Game console
TV, projector, etc.
Personal computer
DVD player, DVD-Audio, Super Audio CD-
capable player, MPEG decorder
(➔
page 46).
(➔
(➔ page 45).
Assignable
✔
✔
✔
✔
✔
✔
✔
✔
page 55). To adjust the
and
En
19