Storage - Yamaha BWS CW50 Owner's Manual

3. To prevent corrosion, it is recom-
mended to apply a corrosion pro-
tection spray on
including chrome- and nickel-plat-
ed, surfaces.
4. Use spray oil as a universal clean-
er to remove any remaining dirt.
5. Touch up minor paint damage
caused by stones, etc.
6. Wax all painted surfaces.
7. Let the scooter dry completely be-
fore storing or covering it.
WARNING
Contaminants on the brakes or tires
can cause loss of control.
●
Make sure that there is no oil or
wax on the brakes or tires. If
necessary, clean
discs and brake linings with a
regular brake disc cleaner or ac-
etone, and wash the tires with
warm water and a mild deter-
gent.
● Before operating the scooter
test its braking performance
and cornering behavior.
NOTICE
all metal, ●
Apply spray oil and wax spar-
ingly and make sure to wipe off
any excess.
● Never apply oil or wax to any
rubber and plastic parts, but
treat them with a suitable care
product.
●
Avoid using abrasive polishing
compounds as they will wear
away the paint.
EWA10942
TIP
●
Consult a Yamaha dealer for ad-
vice on what products to use.
● Washing, rainy weather or humid
climates can cause the headlight
the brake lens to fog. Turning the headlight
on for a short period of time will
help remove the moisture from the
lens.
SCOOTER CARE AND STORAGE
ECA10800

Storage

Short-term
Always store your scooter in a cool, dry
place and, if necessary, protect it
against dust with a porous cover. Be
sure the engine and the exhaust sys-
tem are cool before covering the scoot-
er.
NOTICE
●
●
Long-term
Before storing your scooter for several
months:
1. Follow all the instructions in the
7-3
Storing the scooter in a poorly
ventilated room or covering it
with a tarp, while it is still wet,
will allow water and humidity to
seep in and cause rust.
To prevent corrosion, avoid
damp cellars, stables (because
of the presence of ammonia)
and areas where strong chemi-
cals are stored.
"Care" section of this chapter.
EAU26303
ECA10820
7