INSTRUMENT AND CONTROL FUNCTIONS
Pass switch "
"
Press this switch to flash the head-
light.
Dimmer switch "
Set this switch to "
beam and to "
" for the low beam.
3
Turn signal switch "
To signal a right-hand turn, push this
switch to "
". To signal a left-hand
turn, push this switch to "
released, the switch returns to the
center position. To cancel the turn
signal lights, push the switch in after it
has returned to the center position.
Horn switch "
"
Press this switch to sound the horn.
Start switch "
"
With the sidestand up, push this
switch while applying the front or rear
brake to crank the engine with the
starter. See page 5-1 for starting ins-
tructions prior to starting the engine.
EAU12350
The engine trouble warning light and
ABS warning light (ABS model only)
will come on when the key is turned
to "ON" and the start switch is pus-
EAU12400
hed, but this does not indicate a mal-
/
"
function.
" for the high
Hazard switch "
EAU12460
With the key in the "ON" or "
/
"
position, use this switch to turn on the
hazard lights (simultaneous flashing
of all turn signal lights).
". When
The hazard lights are used in case of
an emergency or to warn other drivers
when your vehicle is stopped where it
might be a traffic hazard.
EAU12500
NOTICE
Do not use the hazard lights for an
extended length of time with the
engine not running, otherwise the
EAU12721
battery may discharge.
EAU44710
Front brake lever
EAU12733
"
"
1. Front brake lever
The front brake lever is located on the
right handlebar grip. To apply the
front brake, pull this lever toward the
handlebar grip.
ECA10061
3-12
EAU12900