Yamaha XMAX YP250R Sports Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Fuel reserve tripmeter
To reset a tripmeter, select it by pus-
hing the "SELECT" button until "Trip"
or "Trip F" begins flashing ("Trip" or
"Trip F" will only flash for five
seconds). While "Trip" or "Trip F" is
flashing, push the "RESET" button for
at least one second. If you do not
reset the fuel reserve tripmeter
manually, it will reset itself automati-
cally and the display will return to the
prior mode after refueling and trave-
ling 5 km (3 mi).
TIP
The display cannot be changed back
to "Trip F" after pushing the "RESET"
button.
Fuel meter
With the key in the "ON" position, the
fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear
towards "E" (Empty) as the fuel level
decreases. When the fuel level rea-
ches the bottom segment near "E",
the fuel level warning indicator and
the bottom segment will flash. Refuel
as soon as possible.
Coolant temperature meter
With the key in the "ON" position, the
coolant temperature meter indicates
the temperature of the coolant. The
coolant temperature varies with chan-
ges in the weather and engine load. If
3-8
the top segment and coolant tempe-
rature warning indicator flash, stop
the vehicle and let the engine cool.
(See page 6-32).
NOTICE
Do not continue to operate the
engine if it is overheating.
Oil change indicator "OIL"
This indicator flashes at the initial
1000 km (600 mi), then at 4000 km
(2500 mi) and every 3000 km (1800
mi) thereafter to indicate that the
engine oil should be changed.
After changing the engine oil, reset
the oil change indicator. (See page
6-10).
ECA10021