Yamaha XMAX YP250R Sports Owner's Manual page 25

1. V-belt replacement indicator "V-BELT"
2. Fuel level warning indicator "
3. Coolant temperature warning indicator "
4. Oil change indicator "OIL"
The multi-function display is equip-
ped with the following:
G a fuel meter
G
a coolant temperature meter
G
an odometer
G
two tripmeters (which show the
distance traveled since they were
last set to zero)
G a fuel reserve tripmeter (which
shows the distance traveled sin-
ce the bottom segment of the
fuel meter and fuel level warning
indicator started flashing)
G
a self-diagnosis device
INSTRUMENT AND CONTROL FUNCTIONS
G
a clock
G
an ambient temperature display
G
an oil change indicator
G
a V-belt replacement indicator
TIP
G Be sure to turn the key to "ON"
before using the "SELECT" and
"RESET" buttons.
G
When the key is turned to "ON",
all of the display segments of the
" multi-function display will appear
"
and then disappear, in order to
test the electrical circuit.
Odometer and tripmeter modes
Pushing the "SELECT" button swit-
ches the display between the odome-
ter mode "Odo" and the tripmeter
modes "Trip" in the following order:
Odo/Trip (top)
(top) Odo/Trip (top)
When approximately 2.0 L (0.53 US
gal, 0.44 Imp.gal) of fuel remains in
the fuel tank, the bottom segment of
the fuel meter and fuel level warning
indicator will start flashing, and the
display will automatically change to
the fuel reserve tripmeter mode "Trip
F" and start counting the distance tra-
veled from that point. In that case,
pushing the "SELECT" button swit-
ches the display between the various
Trip (bottom)/Trip
tripmeter and odometer modes in the
following order:
Trip F/Trip (top)
(top)
(top)
3-7
Trip (bottom)/Trip
Odo/Trip (top) Trip F/Trip
3