Front Brake Lever - Yamaha XCITY VP250 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Dimmer switch "
Set this switch to "
beam and to " " for the low beam.
With the headlight on low beam, press
this switch downwards to flash the
headlight.
3
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch " "
Press this switch to sound the horn.
Start switch " "
With the sidestand up, push this switch
while applying the front or rear brake to
crank the engine with the starter.
EAUS1020
/ "
CAUTION:
" for the high
See page 5-1 for starting instruc-
tions prior to starting the engine.
EAU12460
/ "
". When re-
EAU12500
EAU12720
ECA10050

Front brake lever

ZAUM0084
1. Front brake lever
The front brake lever is located on the
right handlebar grip. To apply the front
brake, pull this lever toward the handle-
bar grip.
3-7
EAU12900
1