1. V-belt replacement indicator "V-BELT"
2. Fuel level warning indicator "
3. Coolant temperature warning indicator "
4. Oil change indicator "OIL"
The multi-function display is equipped
with the following:
●
a fuel meter
●
a coolant temperature meter
●
an odometer
●
two tripmeters (which show the
distance traveled since they were
last set to zero)
●
a fuel reserve tripmeter (which
shows the distance traveled since
the bottom segment of the fuel
meter and fuel level warning indi-
cator started flashing)
●
a self-diagnosis device
●
a clock
INSTRUMENT AND CONTROL FUNCTIONS
●
an ambient temperature display
●
an oil change indicator
●
a V-belt replacement indicator
TIP
●
Be sure to turn the key to "ON" be-
fore using the "SELECT" and "RE-
SET" buttons.
●
When the key is turned to "ON", all
of the display segments of the
multi-function display will appear
"
and then disappear, in order to test
"
the electrical circuit.
Odometer and tripmeter modes
Pushing the "SELECT" button switches
the display between the odometer
mode "Odo" and the tripmeter modes
"Trip" in the following order:
Odo/Trip (top) → Trip (bottom)/Trip
(top) → Odo/Trip (top)
When approximately 2.0 L (0.53 US
gal, 0.44 Imp.gal) of fuel remains in the
fuel tank, the bottom segment of the
fuel meter and fuel level warning indica-
tor will start flashing, and the display will
automatically change to the fuel re-
serve tripmeter mode "Trip F" and start
counting the distance traveled from that
point. In that case, pushing the "SE-
LECT" button switches the display be-
tween the
odometer modes in the following order:
Trip F/Trip (top) → Trip (bottom)/Trip
(top) → Odo/Trip (top) → Trip F/Trip
(top)
3-7
various
tripmeter and
3