Indicator And Warning Lights - Yamaha TMAX XP500 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
the left.
2. Push the key in from the "OFF" po-
sition, and then turn it to "LOCK"
while still pushing it.
1 3. Remove the key.
To unlock the steering
2
Push the key in, and then turn it to
"OFF" while still pushing it.
3
(Parking)
4
The steering is locked, and the taillight,
license plate light and auxiliary lights
5
are on. The hazard lights and turn sig-
nal lights can be turned on, but all other
electrical systems are off. The key can
6
be removed.
The steering must be locked before the
7
key can be turned to "
NOTICE
8
Do not use the parking position for
an extended length of time, other-
9
wise the battery may discharge.

Indicator and warning lights

2 1 3
EAU10941
1. Turn signal indicator lights "
2. High beam indicator light "
3. Anti-lock Brake System (ABS) warning
light "
ABS
4. Immobilizer system indicator light
5. Engine trouble warning light "
".
ECA11020
Turn signal indicator lights "
" "
The corresponding indicator light flash-
es when the turn signal switch is
pushed to the left or right.
High beam indicator light "
This indicator light comes on when the
EAU11003
4 1 5
" and " "
"
" (for ABS models)
"
EAU11030
" and
EAU11080
"
3-3
high beam of the headlight is switched
on.
Engine trouble warning light "
This warning light comes on if an elec-
trical circuit monitoring the engine is not
working correctly. If this occurs, have a
Yamaha dealer check the self-diagno-
sis system.
The electrical circuit of the warning light
can be checked by turning the key to
"ON". If the warning light does not come
on for a few seconds, then go off, have
a Yamaha dealer check the electrical
circuit.
TIP
This warning light will come on when
the key is turned to "ON" and the start
switch is pushed, but this does not indi-
cate a malfunction.
ABS warning light " " (for ABS
ABS
models)
NOTICE
If the ABS warning light comes on or
EAU43021
"
EAU43031
ECA10831