Specifying Reproduction Ratio Manually - Toshiba E-STUDIO207 Operator's Manual

Specifying reproduction ratio manually

1
Place paper in the drawer.
2
Place the original.
3
Press the selecting button A.
The LCD screen shows as follows:
ZOOM
4
Press the selecting button B (–) or C (+) to set the desired reproduc-
tion ratio.
One press of each button increases or decreases the reproduction ratio by 1%. When
you keep pressing either of them, the reproduction ratio also keeps changing. The
reproduction ratio can be set from 25% to 200%.
Press the selecting button A to return it to 100%.
5
Press the [ENTER] button.
The reproduction ratio is set.
6
Press the [COPY] button several times until the lamp of the desired
paper size is lit.
e.g.) Selecting LT for copy paper
You can select the desired paper size with the [DRAWER] button in the same proce-
dure.
When standard size paper other than LD, LT, LT-R, LG or ST-R is placed, register this
size as "OTHER" size in advance.
7
Select the other copy modes as required, and then press the
[START] button.
100%
25% ---- 200%
100% -
P.49 "Registering other standard sizes"
+
Zooming In/Out Copy Image 75