Environmental Information - Toshiba E-STUDIO207 Operator's Manual

Environmental Information

ENERGY STAR
Toshiba Tec Corporation, as a member of the ENERGY STAR Program, confirms that this prod-
uct meets the ENERGY STAR Program requirements.
The ENERGY STAR Program aims at the promotion of the development and wider usage of
office equipment including energy-efficient computers in order to address environmental issues
such as global warming. Manufacturers that participate in this program can attach the ENERGY
STAR logo to products after confirming that they meet the energy saving standards of this pro-
gram. Also, these standards and logo are commonly used within the U.S. Environmental Protec-
tion Agency (EPA) and participating countries.
Energy saving features
Energy saving features are provided in this product in order to reduce power consumption when
it is not being used.
Low power mode
The equipment automatically enters this mode when a specified period of time
ting at the time of shipment: 5 minutes) has passed since the last use.
appears on the LCD screen.
Sleep mode
The equipment automatically enters this mode when a specified period of time
ting at the time of shipment: e-STUDIO167/207: 20 minutes, e-STUDIO237: 30 minutes) has
passed since the last use.
*1 The period from the last use to the time the equipment enters the low power mode or the sleep mode
can be changed. See the following page for details:
P.127 "Timer Setting"
*2 In the sleep mode, the equipment starts warming itself up when print data are received, or when any of
the [ENERGY SAVER] button, the [START] button and the function switching buttons on the control
panel is pressed. When the warm-up has been completed, the equipment goes into the ready status and
starts printing out the data.
*3 This message appears when the Network Printer Kit (optional) is installed, or when this equipment is
connected to a PC with a USB cable. If this equipment is stand-alone, the display on the LCD screen
goes off.
26 Environmental Information
®
Program
*2
"Sleep mode" appears on the LCD screen
*1
(the default set-
*2
"Saving energy"
*1
(the default set-
*3
.