Volvo C30 Owner's Manual page 247

10 Infotainment system
Phone functions*
On/Off
A handset appears in the display when the
10
phone system is active or in standby mode
(standby). If the remote control key is turned to
position 0 when the phone is in one of these
modes, the phone automatically resumes this
mode the next time the remote control key is
turned to position I or II.
Activating the phone system
Phone system functions can only be used
when the phone is in active mode.
1. Press PHONE.
2. Enter the PIN code (if necessary) and press
ENTER.
Deactivating the phone system
No calls can be received when the phone is
deactivated.
Hold PHONE depressed until the phone is
deactivated.
Standby mode (standby)
In standby mode, the audio system can be in
use while calls are received. However, it is not
possible to make calls when in standby mode.
Putting the phone in standby mode
The phone must first be in active mode before
it can be put in standby mode.
Press PHONE.
*
246
Option/accessory, for more information, see Introduction.
Activating from standby mode
Press PHONE.
Making and receiving calls
If the privacy handset is raised when a phone
call is started, the sound will come from the
handsfree system. For information on switch-
ing between privacy handset and handsfree
during a call, see page 248.
To call
1. Activate the phone system (if necessary).
2. Dial the number or use the phone book,
see page 248.
3. Press ENTER or lift the handset. Release
the handset by pressing it down.
Receiving a call
For Auto answer, see menu option 4.3, see
page 250.
Press ENTER or lift the handset. Release
the handset by pressing it down.
Ending a call
Press EXIT or hang up the handset.
Refusing a call
Press EXIT.
Call waiting
A two-tone signal during a phone call indicates
that there is another incoming call.
appears on the display. The call can be refused
or taken in the normal manner. If the incoming
call is taken, the previous call is put on hold.
Putting a call on hold/resuming a call
1. Press MENU or ENTER.
2. Scroll to
Hold or Hold off and press
ENTER.
Dialling a third party
1. Put the call on hold.
2. Dial the number of the third party.
Switching between calls
1. Press MENU or ENTER.
2. Scroll to Swap and press ENTER.
Starting a conference call
A conference call consists of at least three par-
ties that can talk to one another. Once a con-
ference call has been initiated, no more parties
can be connected. All calls are ended when a
conference call is ended.
1. Start two phone calls.
2. Press MENU or ENTER.
3. Scroll to
Join and press ENTER.
Answer?