Volvo C30 Owner's Manual page 183

07 Wheels and tyres
Changing wheels
7. Lift the car so that the wheel is free.
Remove the wheel nuts and lift off the
wheel.
Fitting the wheel
1. Clean the contract surfaces on the wheel
and hub.
2. Put on the wheel. Tighten the wheel nuts.
3. Lower the car so that the wheel cannot
rotate.
4. Tighten the wheel nuts crosswise. It is
important that the wheel nuts are tightened
properly. Tighten to 110 Nm. Check the
torque with a torque wrench.
5. Put on the wheel cover (steel rim).
WARNING
Never crawl under the car when it is raised
on the jack.
Passengers must leave the car when it is
raised on the jack.
07
Ensure that passengers wait with the car -
or preferably a crash barrier - between them
and the road.
182