Samsung CLX-330x/330xW Series User Manual page 206

System setup
Item
You can set the condition to wake up from power-save
mode.
• On: The machine wake up from the power save mode
on the following cases:
Wakeup Event - Pressing any button
- Opening or closing the paper tray
- Inserting paper in the document feeder
• Off: The machine wake up from the power save mode
only when the Power/Wakeup button is pressed.
Sets the time that the machine remembers previously
System Timeout used copy settings. After the timeout, the machine
restores the default copy settings.
Sets the length of time the printer waits before printing
Job Timeout the last page of a print job that does not end with a
command to print the page.
Optimize print quality according to the machine's
Altitude Adj.
altitude.
Optimizes print quality according to the humidity in the
Humidity
environment.
Description Item
Determine whether or not the machine continues
printing when it detects the paper does not match the
paper settings.
• 30 Sec: If a paper mismatch occurs, an error message
will display. The machine waits for about 30 second,
then automatically clear the message and continue
Auto Continue
printing.
• 0 Sec: Even though a paper mismatch occurs, the
machine continues printing.
• Off: If a paper mismatch occurs, the machine waits
until you insert the correct paper.
Automatically substitutes the printer driver's paper size
to prevent the paper mismatch between Letter and A4.
Paper Substit. For example, if you have A4 paper in the tray but you set
the paper size to Letter in the printer driver, the machine
prints on A4 paper and vice versa.
The printer detects the printing data from computer
PrintBlankPage whether a page is empty or not. You can set to print or
skip the blank page.
Description
206
3. Useful Setting Menus