Copying Problems - Samsung CLX-330x/330xW Series User Manual

Copying problems

Condition
Copies are too light or too dark. Adjust the darkness in copy feature to lighten or darken the backgrounds of copies (see "Changing the settings for each copy" on page
Smears, lines, marks, or spots
appear on copies.
Copy image is skewed.
Blank copies print out.
Image rubs off the copy easily.
Frequent copy paper jams
occur.
Toner cartridge produces fewer
copies than expected before
running out of toner.
61).
• If the defects are on the original, adjust darkness in copy feature to lighten the background of your copies.
• Adjust background in copy setup removes the background color (see "Adjust Bkgd" on page 197).
• If there are no defects on the original, clean the scan unit (see "Cleaning the scan unit" on page 94).
• Ensure that the original is aligned with the registration guide.
• The transfer roller may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page 91).
Ensure that the original is face down on the scanner glass or face up in the document feeder.
If these steps do not correct the problem, contact a service representative.
• Replace the paper in the tray with paper from a new package.
• In high humidity areas, do not leave paper in the machine for extended periods of time.
• Fan the paper, then turn it over in the tray. Replace the paper in the tray with a fresh supply. Check/adjust the paper guides, if
necessary.
• Ensure that the paper is the proper type and weight (see "Print media specifications" on page 121).
• Check for copy paper or pieces of copy paper remaining in the machine after a paper jam has been cleared.
• Your originals may contain pictures, solids, or heavy lines. For example, your originals may be forms, newsletters, books, or other
documents that use more toner.
• The scanner lid may be left open while copies are being made.
• Turn the machine off and back on.
Suggested solutions
286
6. Troubleshooting