Samsung CLX-330x/330xW Series User Manual page 156

Installing driver over the network
6 The searched machines will be shown on the screen. Select the one you
wish to use and click OK.
7 Follow the instructions in the installation window.
Silent installation Mode
Silent installation mode is an installation method that does not require any user
intervention. Once you start the installation, the machine driver and software
are automatically installed on you computer. You can start the silent installation
by typing /s or /S in the command window.
Command-line Parameters
Following table shows commands that can be used in the command window.
Following command-line are effective and operated when command is
used with /s or /S. But /h, /H or /? are exceptional commands that can be
operated solely.
Command- line Definition
/s or Starts silent installation.
/S
Description
Installs machine drivers
without prompting any UIs or
user intervention.
Command- line Definition
/p"<port name>" or Specifies printer port.
/P"<port name>"
Network Port will be
created by use of
Standard TCP/IP
Port monitor. For
local port, this port
must exist on
system before
being specified by
command.
/a"<dest_path>" or Specifies destination path
for installation.
/A"<dest_path>"
The destination
path should be a
fully qualified path.
/n"<Printer name>" Specifies printer name.
or Printer instance shall be
created as specified printer
/N"<Printer name>"
name.
Description
Printer port name can be
specified as IP address,
hostname, USB local port
name or IEEE1284 port name.
For example:
• /p"xxx.xxx.xxx.xxx" in
where, "xxx.xxx.xxx.xxx"
means IP address for
network printer. /
p"USB001", /P"LPT1:", /
p"hostname"
Since machine drivers should
be installed on the OS specific
location, this command
applies to only application
software.
With this parameter, you can
add printer instances as your
wishes.
2. Using a Network-Connected Machine
156