Samsung CLX-330x/330xW Series User Manual page 69

Basic faxing
Resolution
The default document settings produce good results when using typical text-
based originals. However, if you send originals that are of poor quality, or
contain photographs, you can adjust the resolution to produce a higher quality
fax.
Select (fax) > (Menu) > Fax Feature > Resolution on the control
1
panel.
Select the option you want and press OK.
2
• Standard: Originals with normal sized characters.
• Fine: Originals containing small characters or thin lines or originals
printed using a dot-matrix printer.
• Super Fine: Originals containing extremely fine detail. Super Fine
mode is enabled only if the machine with which you are
communicating also supports the Super Fine resolution.
• For memory transmission,
resolution setting is automatically changed to
• When your machine is set to
with which you are communicating does not support Super Fine
resolution, the machine transmits using the highest resolution mode
supported by the other fax machine.
• Photo Fax: Originals containing shades of gray or photographs.
Super Fine mode is not available. The
Fine.
Super Fine resolution and the fax machine
3 Press (Stop/Clear) to return to ready mode.
Darkness
You can select the degree of darkness of the original document.
The darkness setting is applied to the current fax job. To change the default
setting (see "Fax" on page 199).
1 Select (fax) > (Menu) > Fax Feature > Darkness on the control
panel.
Select a darkness level you want.
2
Press (Stop/Clear) to return to ready mode.
3
2. Menu Overview and Basic Setup
69