Accessing The Basic Settings - Siemens EH6..ME3.. Instruction Manual

Indicator Function
™‡ Duration of the time program function warning signal
10 seconds.*
‚
30 seconds.
ƒ
„ 1 minute.
Power-Management function
™ˆ
= Deactivated.*
‹
= 1,000 W. minimum power.
‚
. = 1,500 W.
‚
= 2,000 W.
ƒ
etc.
Š or Š . = maximum power of the plate.
™Š Hotplate time selection
‹ Unlimited: the last hotplate programmed remains selected.*
limited: The hotplate will only remain selected for 10 seconds.
‚
Return to default settings
™‹
Personal settings.*
‹
‚ Return to factory settings.
*Factory setting

Accessing the basic settings

The range must be turned off.
Turn on the range with the main switch.
1.
Within the next 10 seconds, press the
2.
4 seconds.
is displayed on the left of the screen and
™‚
Press the 0 symbol several times until the indicator for the
3.
desired function appears on the left of the screen.
16
0 symbol and hold for
on the right.
‹
Then select the desired setting in the programming panel.
4.
Press the 0 symbol again and hold for more than 4 seconds.
5.
The settings will have been correctly saved.
Note: For the ™... setting you must first activate the cooking
sensor and turn on the hotplate.
Quit
To leave the basic settings, turn off the hob at the main switch.