Accessing The Basic Settings; Care And Cleaning; Hob; Hob Frame - Siemens EH9 MD Series Instruction Manual

Table of Contents

Advertisement

Indicator
Function
Duration of the time program function warning signal
™‡
10 seconds*.
ƒ
30 seconds.
1 minute.
Power-Management function
™ˆ
= Deactivated.*
= 1,000 W. minimum power.
= 1,500 W.
ƒ
= 2,000 W.
etc.
or
. = maximum power of the hob.
Š
Š
™Š
Hotplate time selection
Unlimited: the last hotplate programmed remains selected.*
Limited: The hotplate will only remain selected for 10 seconds.
Return to basic settings
™‹
Personal settings.*
Return to factory settings.
*Factory settings

Accessing the basic settings

The hob must be switched off.
Switch on the hob using the main switch.
1.
Within the next 10 seconds, touch and hold the
2.
4 seconds.
appears in the left-hand area of the display and
™‚
appears in the right-hand area.

Care and cleaning

The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition

Hob

Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cool enough
before attempting to clean it.
Only use cleaning products specifically designed for hobs.
Follow the instructions provided on the packaging.
Do not use:
Undiluted washing-up liquid
Dishwasher detergent
Abrasive products
Touch the
3.
shows the required function.
Then select the required setting from the settings range.
4.
0
symbol for
Touch and hold the
5.
The settings have been saved.
Quit
To leave the basic settings, turn off the hob at the main switch.
Corrosive products such as oven sprays or stain removers
Sponges that may scratch
High-pressure or steam cleaners
The best way to remove stubborn stains is to use a glass
scraper. Follow the manufacturer's instructions.
Suitable glass scrapers can be obtained through the Technical
Assistance Service or from our online shop.

Hob frame

In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
Do not use sharp or abrasive products
Do not use a glass scraper
repeatedly until the left-hand area of the display
0
0
symbol for 4 seconds.
13

Advertisement

Table of Contents
loading

Table of Contents