Taking Out Discs - Epson Discproducer PP-50BD User Manual

Taking Out Discs

Follow the steps below to take out the published discs from the stackers.
1. Open the disc cover.
2. Take out the stacker only when the output stacker is stacker 2.
3. Take out the published discs from the stacker. The output stacker differs according to
the publishing mode. Refer to the following table.
Output stacker
Stacker 2
Stacker 3
Stacker 2
Note:
❏ Be sure to let CDs, DVDs, and BDs dry completely before using them or touching the printed
surface. Allow Epson specified discs to dry for at least 1 hour and other types of discs for at
least 24 hours.
❏ If the print position is misaligned, adjust it using the printer driver. For details, refer to the printer
driver Help.
❏ If the ink smears, adjust the color saturation. For details, refer to the printer driver Help.
Mode
Standard Mode
Standard Mode
Low-volume Mode
Stacker 3
Number of discs
Up to about 50 discs
Up to about 20 discs
Publishing Discs
54