Thane Housewares Thunder Stick FP9017-A User Manual page 21

6. Hold the motor body with one hand, select the required speed and
press the ( I ) switch for LOW or ( II ) switch for HIGH speed.
Using the other hand insert the food through the feed tube and use
the food pusher to push the food through if necessary.
!
Never use your fingers to push the food through the
CAUTION
feed tube.
7. During processing you can adjust the speed by selecting the LOW ( I )
or HIGH( II ) speed button.
NOTE: The maximum quantity of food can't exceed the maximum ca-
pacity of the bowl for each operation.
For the most consistent results do not overfill the bowl and process the
food in smaller quantities.
The appliance cannot be used for processing hard food as
NOTICE
it will damage the blades.
8. To stop the THUNDERSTICK™ take your fingers off the switch button
( I ) or ( II ) and unplug the appliance from the power outlet.
23
3. Assemble the Disc Blade (with
desired blade) over the pin in the
food processor bowl as illustrated
in Fig. 3a.
NOTE: Never add food before
installing the Disc Blade.
4. Attach the food processor lid
onto the bowl, refer to Fig. 4a.
Make sure that the two tongs
(extensions) on the lid are aligned
with the two grooves on the food
processor bowl as illustrated in
Fig. 4b.
Once the two tongs on the lid are
slotted in the two grooves, push
down the lid until it is securely
locked in place as illustrated in
Fig. 4c.
NOTE: Make sure that the food
processor lid is securely locked in
place before operating the appliance.
FIG. 4a.
FIG. 4b.
FIG. 4c.
20