How To Operate The Food Processor; With Vortex 4 Blade - Thane Housewares Thunder Stick FP9017-A User Manual

OPTIONAl ATTACHMENTS
BLEnDER
Motor Appliance
Blender Lid
Blender
Vortex 4 Blade
Blender Jug
(max. capacity
1.5 LIT / 50.5 oz)
Non-slip Base
Storage Lid
27
hOW TO OPERaTE ThE FOOD PROCESSOR WITh VORTEX 4 BLaDE
Use the chopper to chop small amounts of food such as meat, cheese,
onions, herbs, garlic, carrots, nuts, etc.
1. Make sure that the non-slip base
is correctly attached to the bottom
of the food processor bowl.
2. Place the food processor on a flat
surface such as a kitchen countertop.
3. Place the food inside the food
processor bowl or insert the food
through the feed tube on the lid
once the lid is installed.
NOTE: Before processing fruit
remove any pits, and if processing
meat remove any bones and cut
into small pieces.
NOTE: Do not use for processing
hard cheese.
For the most consistent results do not overfill the bowl and process the
food in smaller quantities.
4. Make sure that the lid is securely locked and the large food pusher and
the small food pusher are in place.
5. Plug the THUNDERSTICK™ into a power outlet.
6. Hold the motor body with one hand and the food processor bowl with
the other and then select the required speed and press the ( I ) switch
for LOW or ( II ) switch for HIGH speed.
Maximum time of continuous use at high or low speed should
NOTICE
not exceed 30 seconds.
7. During processing you can adjust the speed by selecting the LOW ( I )
or HIGH ( II ) speed button.
NOTE: During operation, you can insert the food through the feed tube
and use the food pusher to push the food through if necessary.
16