Thane Housewares Thunder Stick FP9017-A User Manual page 10

3. hOW TO REMOVE ThE BLaDE
Insert the blade tool under the
blade as illustrated in Fig. 3a.
NOTE: The blade tool must be
positioned under the blade on the
opposite side of the stop pin as
illustrated in Fig. 3b, so the stop
pin is not in the way and doesn't
obstruct movement of the blade
tool.
Remove the blade by pushing it out
with the blade tool.
When removing the blade always
point the bottom part of the
detachable shaft against the
countertop surface in such a way
that when the blade is pushed out it
safely lands on the countertop Fig. 3c.
!
Exercise caution when removing the blade.
CAUTION
Countertop
FIG. 3c.
Stop pin
Blade Tool
FIG. 3a.
Stop pin
FIG. 3b.
Countertop
9
aSSEMBLY OF ThE ChOPPER
!
CAUTION
Always be sure that the appliance is unplugged before attaching or
removing any attachments.
!
The blades are very sharp. Handle with care.
CAUTION
!
CAUTION
Always place the chopper bowl on a clean level surface
and check if the non-slip base on the bottom of the chopper bowl is
in place before assembly.
1. Assemble the chopper blade by
placing the blade over the pin in
the chopper bowl as shown in
Fig. 1a.
2. Attach the Chopper lid onto the
bowl, refer to Fig. 2a., and turn
it in a clockwise direction until
the tongs on the chopper bowl
are aligned and locked with the
grooves on the chopper lid , as
illustrated in Fig 2b.
To detach the lid, turn it in the
opposite direction.
Groove
Tong
FIG. 2a
FIG. 1a
FIG. 2b
34