Thane Housewares Thunder Stick FP9017-A User Manual page 16

3. To assemble the motor appliance,
align the arrow mark on the motor
appliance with the unlocked symbol
( ) on the food processor lid and
attach the motor body to the food
processor lid. Turn the motor body
in the clockwise direction until
the arrow mark on the motor
appliance is aligned with the
locked symbol ( ) on the lid and
the motor appliance is securely
locked in place as shown in Fig. 3a.
FIG. 3a.
15
aSSEMBLY OF ThE BLEnDER
!
CAUTION
Always be sure that the appliance is unplugged before attaching or
removing any attachments.
!
CAUTION
The blades are very sharp. Handle with care.
!
CAUTION Always place the blender jug on a clean level surface
and check if the non-slip base on the bottom of the blender jug is in
place before assembly.
1. Assemble the vortex 4 blade for
blender over the pin in the
blender jug as shown in Fig.1a.
NOTE: Never add food before
installing the vortex 4 blade for
blender.
2. Attach the blender lid onto the
blender jug, make sure that the
spout cover on the lid is aligned
with the spout on the blender jug.
Push down the lid until it is
securely locked in place as
illustrated in Fig. 2a and 2b.
NOTE: Make sure that the blender
lid is securely locked in place before
operating the appliance.
FIG. 1a.
FIG. 2a.
FIG. 2b.
28