Assembly Of Option 1 - Vortex 4 Blade - Thane Housewares Thunder Stick FP9017-A User Manual

3. To assemble the motor appliance,
align the arrow mark on the motor
appliance with the unlocked symbol
( ) on the blender lid and attach
the motor body to the blender
lid. Turn the motor body in the
clockwise direction until the arrow
mark on the motor appliance is
aligned with the locked symbol
( ) on the lid and the motor
appliance is securely locked in
place as shown in Fig. 3a.
FIG. 3a.
29

aSSEMBLY OF OPTIOn 1 - VORTEX 4 BLaDE

!
CAUTION
Always be sure that the appliance is unplugged before attaching or
removing any attachments.
!
CAUTION
The blades are very sharp. Handle with care.
!
CAUTION
Always place the food processer bowl on a clean level
surface and check if the non-slip base on the bottom of the food
processer bowl is in place before assembly.
1. Assemble the vortex 4 blade over
the pin in the food processor bowl
as shown in Fig.1a.
NOTE: Never add food before installing the vortex 4 blade.
2. Attach the food processor lid
onto the bowl, refer to Fig. 2a.
Make sure that the two tongs
(extensions) on the lid are aligned
with the two grooves on the food
processor bowl as illustrated in
Fig. 2b. Once the two tongs on the
lid are slotted in the two grooves,
push down the lid until it is
securely locked in place as
illustrated in Fig. 2c.
NOTE: Make sure that the food
processor lid is securely locked in
place before operating the
appliance.
FIG. 2b.
14
FIG. 1a.
FIG. 2a.
FIG. 2c.