Rear Climate Control - Mazda 2014 CX-9 Smart Start Manual

FRONT SEAT WARMERS
The driver and front passenger seats can be warmed by pushing the
applicable seat warmer button while the ignition is ON.
• S eat temperature increases as the number of indicator lights
increases. Two lights equal high, one light equals low.
• W hen the seat warmers are not needed, push button until indicator
lights are off.

REAR CLiMATE CONTROL

Operation from Front Seats
1 Turn the front air conditioning on.
on the front control panel
(indicator on).
3 S election of the airflow mode,
airflow amount and temperature
will be automatically controlled
to the same setting as the front
air conditioner.
Operation from Rear Seats
AUTO ON:
1 Turn the front air conditioning on.
2 P ush AUTO ON button on the rear control panel to turn Rear
Automatic Air Conditioning system on. Push Temperature setting
button on the rear control panel to select your desired set
temperature. The air flow mode and amount of air flow will be
automatically controlled in accordance with the set temperature.
NOTE:
If the rear AUTO button is pushed while the front A/C button is off, the
rear air conditioning operates only to circulate air. Setting the temperature to the
maximum high or low will not provide the desired temperature at a faster rate.
NOTE:
The automatic temperature control always works, even if the AUTO ON
indicator light comes off after rotating the Fan Control Dial or changing vent mode.
NOTE:
Automatic climate control will allow you to maintain individual preset cabin
temperatures for the driver and passenger when DUAL mode is selected.
1406031_14a_Mazda_CX-9_SSG_071013.indd 18
www.MazdaUSA.com
Rear Control Panel
18
7/10/13 9:03 AM