Mazda 2014 CX-9 Smart Start Manual page 24

Navigation
TO REMOVE OR iNSERT ThE MAP SD CARD:
1 Turn the vehicle ignition OFF.
2 L ocate the sliding door on the lower left side
NOTE:
•
•
•
PLANNiNg A ROUTE USiNg ThE TOUCh-SCREEN
iMPORTANT: In the interest of safety and to reduce distractions while you
are driving, you should always plan a route before you start driving.
To plan a route on your Navigation system, do the following:
1 Push the NAV button to access the Navigation System.
2 Touch the screen (above) to open the Main Menu (below).
23
1406031_14a_Mazda_CX-9_SSG_071013.indd 23
of the dash (see page 5) and slide it open (right).
• Remove card: Push the card once, then pull it out.
• Insert card: Push the card in (label-side up), then slide door closed (left).
Visit www.mazdausa.com/navigation within 60 days of vehicle delivery and
download the most recent map available for your device for free. In order to
download or upgrade your map, the TomTom Home software must be downloaded.
Please refer to the Navigation System Owners Manual section of
www.mazdausa.com/navigation for additional information.
O nly use your MAP SD card for operating and updating your navigation system. Do not
insert the MAP SD card into another vehicle or into any other device such as a camera.
I f your vehicle is not equipped with a factory navigation system, your audio system
can be upgraded to include navigation. Contact your Authorized Mazda Dealer for
more details.
Navigation System
3 Touch Navigate to.
4 Touch Address.
NOTE:
You can change the country or
state setting by touching the flag before
you select a city.
5 Enter the town or city name.
SD Card
7/10/13 9:04 AM