Mazda 2014 CX-9 Smart Start Manual page 4

Seats
ELECTRONiCALLY OPERATED SEAT WiTh MEMORY
Recline Switch
Push forward or backward
to adjust seatback angle.
Slide/Tilt Switch
Seat can be moved back
and forth, raised, lowered,
or tilted with this control.
Memory Seat Switch
To Program the Driver's Seat Position and Outside Mirror Angle
1 Park the vehicle.
2 A djust the seat to the desired position using the slide/tilt and
3 A djust the outside mirror angles.
4 P ush the memory seat SET button followed by one of the programming
To Program the Driver's Seat Position and Outside Mirror Angle
with Advanced key/Retractable type key
1 Adjust the seat and outside mirror angle to the desired positions.
2 Switch the ignition off.
3 P ush the SET button next to the programming buttons and then the
NOTE:
retractable type key, the seat and outside mirror angles will move to their programmed
positions if the driver's door is opened within about 40 seconds. A beep sound is
heard after the adjustment to the programmed positions is completed.
To Move the Seat and Outside Mirrors to a Programmed Position
1 Shift the selector lever to the P position.
2 P ush the programming button (1-3) that you selected when
3
1406031_14a_Mazda_CX-9_SSG_071013.indd 3
recline switches.
buttons (1-3) until a beep is heard. Programming is now complete.
Program the remaining two buttons as desired.
unlock button on the advanced key/retractable type key you want to
program within about 5 seconds. A beep sound is heard when the
operation is completed.
When the driver's door is unlocked using a programmed advanced key/
programming your seat position.
Lumbar Switch
Push forward or backward to increase or
decrease lumbar support.
7/10/13 9:02 AM