To Make Or Receive A Hands-Free Call - Mazda 2014 CX-9 Smart Start Manual

your phone's name. Some phones will turn off the Bluetooth signal after
connecting the USB cable to the vehicle or after downloading an update
• If not displayed, check your phone and make sure Bluetooth is turned on
(or discoverable) in the Settings menu. Detailed instructions for some phones
are available online.
• If there is still no connection, delete the pairing data on the system and
your phone and try again after confirming your cell phone is compatible at
www.MazdaUSA.com/bluetooth.

TO MAKE OR RECEiVE A hANDS-FREE CALL

Basic Operation:
button: To make/receive/swap a call.
button: To end/reject a call.
button: To skip voice guidance
(for speeding up operation).
BLUETOOTh FEATURES (WiTh NAVigATiON)
NOTE:
if "Message" is grayed out, your phone does not support this
feature. See your Owner's Manual for more information.
DON'T DiSTURB ME: You will not receive phone calls and messages.
DOWNLOAD PhONEBOOK: Use this feature and "All Contacts" to download
and update your phonebook in the vehicle. Some PHONEBOOKS may not
automatically update if changes are made on your phone.
AUTOMATiC 911 CALL: Calls 911 after certain moderate to severe collisions.
This can be turned ON and OFF.
NOTE:
• Phone must be paired and connected.
• S ome phone models do not support all features.
Go to www MazdaUSA.com/bluetooth or contact (800) 430-0153
for further assistance or to report a phone/MP3 device concern.
• See your Owner's Manual for more information.
1406031_14a_Mazda_CX-9_SSG_071013.indd 26
NOTE:
For connection issues, please confirm the Bluetooth
connection status by pushing the PHONE button and
looking in the top left corner for the Bluetooth icon and
See your Owner's Manual for more information.
Push the PHONE button, then select the
"Setup" tab.
SMS TEXT AUDiO DELiVERY/
VOiCE REPLY: Play (read) text from
a Bluetooth connected phone and
respond back.
www.MazdaUSA.com
Automatic Bluetooth
Reconnection:
On engine start, the last connected
device will automatically be re-connected
after several seconds. To switch phones,
go to BLUETOOTH SETUP.
26
7/10/13 9:04 AM