Preset Setup - Honeywell 10X User Manual

Preset Setup

PRESET SETUP
------------------------
PRESET NO.
CLR PRESET
<EDIT SCENE>
<EDIT LABEL>
CAM ADJUST
BACK
EXIT
Document 800-06705 - Rev A - 12/10
Preset Number
1
CANCEL
LABEL123
GLOBAL
Clear Preset
Edit Preset Scene
Edit Preset Label
Cam Adjust
Mini PTZ Dome Camera User Guide
[1~128]
Selects a Preset number to set up. If a selected
Preset is already defined, the camera moves to
the pre-defined position and parameters such as
Label and Cam Adjust show on the monitor. If a
selected Preset is not defined, UNDEFINED
shows on the monitor.
[CANCEL/OK]
Deletes the data of the selected Preset.
Redefines the scene position of the selected
Preset.
Edits the label of the selected Preset to show on
the monitor when the Preset runs. Maximum 10
alphanumeric characters are allowed.
[GLOBAL/LOCAL]
White Balance (WB) and Auto Exposure (AE) can
be set up independently for each Preset. There
are two modes: Global mode and Local mode. In
Global mode, WB and/or AE are set up
simultaneously for all Presets. Global WB/AE
parameters are set up in the Zoom Camera Setup
menu. In Local mode, WB/AE are set up
separately for each
parameters are set up in each Preset setup
menu. The settings are activated when the
camera arrives at the Preset position. During jog
operation, Global WB/AE values should be
applied.
Note that Local mode settings have priority over
Global mode settings. Local WB/AE values do not
change when Global WB/AE values are change.
Preset. Local WB/AE
39