Motion Setup - Honeywell 10X User Manual

Motion Setup

MOTION SETUP
------------------------
MOTION LOCK
PWR UP ACTION
AUTO FLIP
JOG MAX SPEED
JOG DIRECTION
FRZ IN PRESET
<PARKING ACTION SETUP>
BACK
EXIT
Document 800-06705 - Rev A - 12/10
Sets the general functions of pan/tilt motions.
Motion Lock
OFF
ON
ON
120/SEC
INVERSE
OFF
Power Up Action
Auto Flip
Jog Max Speed
Jog Direction
Freeze in Preset
Mini PTZ Dome Camera User Guide
[ON/OFF]
If Motion Lock is set to ON, it is impossible to set
up or delete Preset, Swing, Pattern and Group. It is
only possible to run those functions
[ON/OFF]
Refer to "Other Functions" section.
[ON/OFF]
Refer to "Other Functions" section.
[1°/sec ~360°/sec]
Sets the maximum jog speed. The Jog speed is
inversely proportional to the zoom magnifications.
As the zoom magnification increases, the pan/tilt
speed decreases.
[INVERSE/NORMAL]
Sets the jog direction. If this is set to INVERSE, the
view direction displayed on the screen is same as
the direction of joystick. If the jog direction is set to
NORMAL, the view direction in the screen is the
reverse direction of joystick.
[ON/OFF]
Sets Frame Freeze function. This feature freezes
the scene on the monitor when going to a Preset.
At the start point of a Preset movement, the
camera starts freezing the image of the start point.
The camera keeps displaying the image of the
start point during Preset movement and does not
display the images acquired during the movement.
As soon as camera stops at the Preset end point,
the camera begins displaying live images acquired
during the movement. This feature reduces
bandwidth when working with digital systems or
digital network systems.
37