Wireless Network - Brother DCP-J100 Quick Start Manual

Wireless Network

Install the drivers and software
®
(Windows XP Home/XP Professional/Windows Vista
14
Before you install
Make sure that your computer is ON and you are
logged on with Administrator rights.
15
Install MFL-Pro Suite
a
Put the CD-ROM into your CD-ROM drive. If
the model name screen appears, choose your
machine. If the language screen appears,
choose your language.
NOTE
If the Brother screen does not appear
automatically, go to Computer (My Computer).
®
(For Windows 8: click the
icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then
double-click start.exe.
b
Click Install MFL-Pro Suite and click Yes if
you accept the license agreements.
c
Choose Wireless Network Connection, and
then click Next.
d
When the Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended), and then click Next.
If you are not using the Windows
the instructions provided with your firewall
software for information on how to add the
following network ports.
For network scanning, add UDP port 54925.

 If you still have trouble with your network
connection, add UDP ports 137 and 161.
18
®
/Windows
e
f
g
h
(File Explorer)
i
j
®
Firewall, see
® ®
7/Windows 8)
Choose your machine from the list, and then
click Next.
NOTE
• If your machine is not found over the network,
confirm your settings by following the
on-screen instructions. If you encounter this
failure, go to step 12-b on page 14 and set up
the wireless connection again.
• If you are using WEP and the LCD displays
Connected but your machine is not found on
the network, make sure you entered the WEP
key correctly. The WEP key is case-sensitive.
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
If the Environmental Advice for Imaging
Equipment screen appears, click Next.
When the On-Line Registration screen
appears, follow the on-screen instructions.
Click Next.
If you do not want to set your machine as the
default printer, clear the Set as Default Printer
check box, and then click Next.
When the Setup is Complete window
appears, confirm the settings, and then click
Next.
®
Windows