Control Panel; Control Settings; Features - GE SH208 Owner's Manual

About the washer control panel.
You can locate your model number at the top inside of the door opening.
Automatic Dispenser
SAFETY LATCH / SLIDE TO OPEN
1

Control Settings

Automatic Dispenser and Safety Latch
1
Safety latch slides to the right to open drawer. (Latch locks to the left on its own.) Add detergent,
liquid bleach and fabric softener to this drawer.
Temperature
2
Select the water temperature for the wash and rinse cycles. Always follow garment manufacturer's
care label instructions when laundering.
Wash Cycle
3
The wash cycle controls the length of the washing process. The chart below will help you match the
wash cycle setting with your loads.
PRE WASH
REGULAR
HEAVY WASH
WASH
PERM PRESS
KNITS & DELICATES
Set the desired wash cycle by pushing in cycle knob and turning clockwise.
Start the washer by closing the door and pulling out the cycle knob.
To stop the washer, push in the cycle knob and pull out to restart.
The washer will not operate with the door open.
The door will automatically lock during the entire wash cycle.
TEMPERATURE CYCLE SIGNAL
WASH/RINSE
WARM COLD
COLD
COLD
OFF
HOT WARM
COLD WARM
2
For heavily soiled and protein-stained items. Follow Pre Wash with
a complete wash cycle.
For heavy to lightly soiled cottons, household linens, work and play
clothes.
For normal to heavily soiled loads.
For lightly to normally soiled loads.
For easy care and wrinkle-resistant items.
Specially designed for normally soiled knits and delicate fabrics.
EXTRA RINSE
REGULAR / PERM PRESS
YES
NO
ON
Features and appearance may vary.
KNITS & REGULAR
PREWASH
FINAL
DELICATES
SPIN
HEAVY WASH
WASH
WASH
RINSES
DOOR
& SPINS
LOCKED
FINAL
SPIN
RINSES & SPINS FAST
SPIN
PERM PRESS
WASH
3
5