Control Panel - GE GFWS1700H Technical Service Manual

Control Panel

The control panel is held in place with Phillips head
screws and tabs.
Control Panel Assembly Removal For 1600, 1700,
1705, 400 and 450:
1. Pull the dispenser out to the stop position. Press
down on the lock tab. Pull the dispenser out.
(Note: 1600 use same detergent box as 1100.)
2. Remove all 4 Phillips head screws from the
control panel dispenser recess.
3. Lift the panel to disengage from top and bottom
tabs that hold the right of the panel in place.
Top Tab
Top Tab
4. Disconnect the wire harnesses from the control
panel.
Lock Tab
Lock Tab
Bottom Tap
Bottom tap
– 32 –
Control Panel Assembly Removal For 1100, 1200
and 1300:
1. Remove the top panel. (See Top Panel section.)
2. Pull the dispenser out to the stop position. Press
down on the lock tab. Pull the dispenser out.
Lock Tab
Lock Tab
3. Remove the 2 Phillips head screws from the
control panel dispenser recess.
4. Remove the 3 Phillips head screws that attach
the top of the control panel to the control panel
cover.
Lock Tab
Lock Tab
5. Lift the top edge of the panel to disengage the
lock tab that hold the top of the panel in place.
6. Lift the panel to disengage from the bottom tab
that hold the right of the panel in place.
7. Disconnect the 9 wire harnesses from the
control panel.
Rear View
Bottom Tab
Bottom tab